| ID | Name | Flags | Description |
|---|---|---|---|
FILTER_SANITIZE_EMAIL |
"email" | Remove all characters except letters, digits and !#$%&'*+-=?^_`{|}~@.[]. | |
FILTER_SANITIZE_ENCODED |
"encoded" |
FILTER_FLAG_STRIP_LOW,
FILTER_FLAG_STRIP_HIGH,
FILTER_FLAG_STRIP_BACKTICK,
FILTER_FLAG_ENCODE_LOW,
FILTER_FLAG_ENCODE_HIGH
|
URL-encode string, optionally strip or encode special characters. |
FILTER_SANITIZE_MAGIC_QUOTES |
"magic_quotes" | Apply addslashes(). | |
FILTER_SANITIZE_NUMBER_FLOAT |
"number_float" |
FILTER_FLAG_ALLOW_FRACTION,
FILTER_FLAG_ALLOW_THOUSAND,
FILTER_FLAG_ALLOW_SCIENTIFIC
|
Remove all characters except digits, +- and optionally .,eE. |
FILTER_SANITIZE_NUMBER_INT |
"number_int" | Remove all characters except digits, plus and minus sign. | |
FILTER_SANITIZE_SPECIAL_CHARS |
"special_chars" |
FILTER_FLAG_STRIP_LOW,
FILTER_FLAG_STRIP_HIGH,
FILTER_FLAG_STRIP_BACKTICK,
FILTER_FLAG_ENCODE_HIGH
|
HTML-escape '"<>& and characters with ASCII value less than 32, optionally strip or encode other special characters. |
FILTER_SANITIZE_FULL_SPECIAL_CHARS |
"full_special_chars" |
FILTER_FLAG_NO_ENCODE_QUOTES,
|
Equivalent to calling htmlspecialchars() with ENT_QUOTES set. Encoding quotes can
be disabled by setting FILTER_FLAG_NO_ENCODE_QUOTES. Like htmlspecialchars(), this
filter is aware of the default_charset and if a sequence of bytes is detected that
makes up an invalid character in the current character set then the entire string is rejected resulting in a 0-length string.
When using this filter as a default filter, see the warning below about setting the default flags to 0.
|
FILTER_SANITIZE_STRING |
"string" |
FILTER_FLAG_NO_ENCODE_QUOTES,
FILTER_FLAG_STRIP_LOW,
FILTER_FLAG_STRIP_HIGH,
FILTER_FLAG_STRIP_BACKTICK,
FILTER_FLAG_ENCODE_LOW,
FILTER_FLAG_ENCODE_HIGH,
FILTER_FLAG_ENCODE_AMP
|
Strip tags, optionally strip or encode special characters. |
FILTER_SANITIZE_STRIPPED |
"stripped" | Alias of "string" filter. | |
FILTER_SANITIZE_URL |
"url" | Remove all characters except letters, digits and $-_.+!*'(),{}|\\^~[]`<>#%";/?:@&=. | |
FILTER_UNSAFE_RAW |
"unsafe_raw" |
FILTER_FLAG_STRIP_LOW,
FILTER_FLAG_STRIP_HIGH,
FILTER_FLAG_STRIP_BACKTICK,
FILTER_FLAG_ENCODE_LOW,
FILTER_FLAG_ENCODE_HIGH,
FILTER_FLAG_ENCODE_AMP
|
Do nothing, optionally strip or encode special characters. This
filter is also aliased to FILTER_DEFAULT.
|
When using one of these filters as a default filter either through your ini file
or through your web server's configuration, the default flags is set to
FILTER_FLAG_NO_ENCODE_QUOTES. You need to explicitly set
filter.default_flags to 0 to have quotes encoded by default. Like this:
Example #1 Configuring the default filter to act like htmlspecialchars
filter.default = full_special_chars
filter.default_flags = 0
| 版本 | 说明 |
|---|---|
| 5.2.11/5.3.1 |
Slashes (/) are removed by
FILTER_SANITIZE_EMAIL. Prior they were retained.
|
Please be aware that when using filter_var() with FILTER_SANITIZE_NUMBER_FLOAT and FILTER_SANITIZE_NUMBER_INT the result will be a string, even if the input value is actually a float or an int.
Use FILTER_VALIDATE_FLOAT and FILTER_VALIDATE_INT, which will convert the result to the expected type.
This is an example for a form having a group of checkboxes besides a lot of other inputs:
$args = array(
'details' => array(
'name' => 'details[]',
'filter' => FILTER_SANITIZE_STRING,
'flags' => FILTER_REQUIRE_ARRAY
)
// ,
// a lot of other stuff here (all the form's elements)
);
$myInputs = filter_input_array( INPUT_GET, $args, true );
where the checkboxes are (their form is in a page that reloads itself):
<label>
<input type="checkbox" name="details[]" value="A" <?php if (in_array( "A", $myInputs['details'] )) { echo 'checked'; } ?>>
Show A
</label>
<label>
<input type="checkbox" name="details[]" value="B" <?php if (in_array( "B", $myInputs['details'] )) { echo 'checked'; } ?>>
Show B
</label>
<label>
<input type="checkbox" name="details[]" value="C" <?php if (in_array( "C", $myInputs['details'] )) { echo 'checked'; } ?>>
Show C
</label>
<label>
<input type="checkbox" name="details[]" value="D" <?php if (in_array( "D", $myInputs['details'] )) { echo 'checked'; } ?>>
Show D
</label>
To include multiple flags, simply separate the flags with vertical pipe symbols.
For example, if you want to use filter_var() to sanitize $string with FILTER_SANITIZE_STRING and pass in FILTER_FLAG_STRIP_HIGH and FILTER_FLAG_STRIP_LOW, just call it like this:
$string = filter_var($string, FILTER_SANITIZE_STRING, FILTER_FLAG_STRIP_HIGH | FILTER_FLAG_STRIP_LOW);
The same goes for passing a flags field in an options array in the case of using callbacks.
$var = filter_var($string, FILTER_SANITIZE_SPECIAL_CHARS,
array('flags' => FILTER_FLAG_STRIP_LOW | FILTER_FLAG_ENCODE_HIGH));
Thanks to the Brain Goo blog at popmartian.com/tipsntricks/for this info.
FILTER_SANITIZE_STRING doesn't behavior the same as strip_tags function. strip_tags allows less than symbol inferred from context, FILTER_SANITIZE_STRING strips regardless.
<?php
$smaller = "not a tag < 5";
echo strip_tags($smaller); // -> not a tag < 5
echo filter_var ( $smaller, FILTER_SANITIZE_STRING); // -> not a tag
?>
Here is a simpler and a better presented ASCII list for the <32 or 127> filters
(if wikipedia confused the hell out of you):
http://www.danshort.com/ASCIImap/
Just to clarify, since this may be unknown for a lot of people:
ASCII characters above 127 are known as "Extended" and they represent characters such as greek letters and accented letters in latin alphabets, used in languages such as pt_BR.
A good ASCII quick reference (aside from the already mentioned Wikipedia article) can be found at: http://www.asciicodes.com/
Support for FILTER_SANITIZE_FULL_SPECIAL_CHARS was added from version 5.3.3
Remember to trim() the $_POST before your filters are applied:
<?php
// We trim the $_POST data before any spaces get encoded to "%20"
// Trim array values using this function "trim_value"
function trim_value(&$value)
{
$value = trim($value); // this removes whitespace and related characters from the beginning and end of the string
}
array_filter($_POST, 'trim_value'); // the data in $_POST is trimmed
$postfilter = // set up the filters to be used with the trimmed post array
array(
'user_tasks' => array('filter' => FILTER_SANITIZE_STRING, 'flags' => !FILTER_FLAG_STRIP_LOW), // removes tags. formatting code is encoded -- add nl2br() when displaying
'username' => array('filter' => FILTER_SANITIZE_ENCODED, 'flags' => FILTER_FLAG_STRIP_LOW), // we are using this in the url
'mod_title' => array('filter' => FILTER_SANITIZE_ENCODED, 'flags' => FILTER_FLAG_STRIP_LOW), // we are using this in the url
);
$revised_post_array = filter_var_array($_POST, $postfilter); // must be referenced via a variable which is now an array that takes the place of $_POST[]
echo (nl2br($revised_post_array['user_tasks'])); //-- use nl2br() upon output like so, for the ['user_tasks'] array value so that the newlines are formatted, since this is our HTML <textarea> field and we want to maintain newlines
?>
This should help with most simple "textarea" fields in post forms.
Removing user html tags while maintaining text formatting such as newlines and carriage returns involves using the FILTER_SANITIZE_STRING filter ID with the flag !FILTER_FLAG_STRIP_LOW. The formatting text (the low ASCII values under decimal 32) are encoded because of the included FILTER_FLAG_ENCODE_LOW flag, but you are now preventing these from being removed. When you want to display the value on the page back in its intended format, use nl2br() so the encoded newlines are formatted properly on the page.
This example cleans $_POST data from a textarea field with the name "user_tasks" on a previous html form, stripping tags but maintaining formatting (at least for newlines):
<?php
$postfilter =
array(
'user_tasks' => array('filter' => FILTER_SANITIZE_STRING, 'flags' => !FILTER_FLAG_STRIP_LOW), // removes tags. formatting code is encoded -- add nl2br() when displaying
);
$revised_post_array = filter_input_array(INPUT_POST, $postfilter); // must be referenced via a variable which is now an array that takes the place of $_POST[]
echo (nl2br($revised_post_array['user_tasks'])); // here we use nl2br() for the displayed value, for the ['user_tasks'] array value so that the newlines are formatted
?>
A good list of which ASCII characters are < 32 and > 127 can be found at: http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
Just a hint I tested,
You can obtain all the chars <32 (so newline and c.return), by using not operator > !FILTER_FLAG_STRIP_LOW as the last argument.
Example:
filter_input(INPUT_GET,'test',FILTER_SANITIZE_STRING,!FILTER_FLAG_STRIP_LOW);
The filter keeps working as before removing anything else as before apart from FILTER_FLAG_STRIP_LOW.
Just filter those "bad" chars <32 manually you don't want.
Beware that FILTER_FLAG_STRIP_LOW strips NEWLINE and TAG and CARRIAGE RETURN chars. If you have a form that accepts user input in plaintext format, all the submitted text will lose all the line breaks, making it appear all on one line. This basically renders this filter useless for parsing user-submitted text, even in plain text.
It's not entirely clear what the LOW and HIGH ranges are. LOW is characters below 32, HIGH is those above 127, i.e. outside the ASCII range.
<?php
$a = "\tcafé\n";
//This will remove the tab and the line break
echo filter_var($a, FILTER_SANITIZE_STRING, FILTER_FLAG_STRIP_LOW);
//This will remove the é.
echo filter_var($a, FILTER_SANITIZE_STRING, FILTER_FLAG_STRIP_HIGH);
?>